「提升门配件」厂房电动提升门常见故障及解决方案

「提升门配件」厂房电动提升门常见故障及解决方案



Common Faults and Solutions of Electric Hoist Door in Factory Building of "Hoist Door Accessories"

 

本公司专业制作各种提升门，推拉门，折叠门，并低价批发相应配件，如门板，轨道，滑轮，吊轮，吊轨，密封门边，简易门边，插销，塔轮，扭簧，实心轴等



The company specializes in the production of various lifting doors, sliding doors, folding doors, and low-cost wholesale corresponding accessories, such as door panels, tracks, pulleys, cranes, lifting rails, sealed door edges, simple door edges, bolts, tower wheels, torsion springs, solid shafts, etc.

拥有多条大型生产线，可承接各种大型工业门配件供货工程，欢迎新老客户咨询，下单。



We have many large-scale production lines, which can undertake various large-scale industrial door accessories supply projects. Welcome new and old customers to consult and place orders.



「提升门配件」厂房电动提升门常见故障及解决办法



Common Faults and Solutions of Electric Lifting Door in "Lifting Door Accessories" Workshop



1、电缆的损坏，



1. Cable damage.



原因和解决设施：电缆线松弛；为了避免情况更加恶化，请在鼓轴绕线前更换电缆；



Causes and solutions: Cable cable is loose; in order to avoid worsening the situation, please replace the cable before winding the drum shaft;



2、门倒落，



2. The door falls down.



原因和解决设施：弹簧损坏；安装防弹弹簧损坏装置，根据维护记录，在弹簧非常大应用次数前替换弹簧；



Reasons and solutions: spring damage; installation of bullet-proof spring damage device, according to maintenance records, in the spring before the very large number of applications;

3、工业门缓冲弹性不好



3. Bad cushioning elasticity of industrial doors



原因和解决设施：下衬垫的损坏；更换损坏的衬垫；



Reasons and solutions: damage of underlying liner; replacement of damaged liner;



4、门板可能夹到手指，



4. The door panel may clip to the finger.



原因和解决设施：滑升门的门板折页安装不正确；重新按照说明书规范安装；



Reasons and solutions: incorrect installation of sliding door door folder; re-installation in accordance with specifications;

5、保护外壳容易脱落，



5. The protective shell is easy to fall off.



原因和解决设施：安装时，没有给保护壳的脱轨做好保护；选择合适的保护外壳支撑架，在问题去除前重新绕电缆；



Reasons and Solutions: When installing, the derailment of the protective case is not well protected; the appropriate protective case support is selected and the cable is rewound before the problem is removed;



6、工业门发现快速上升情况，



6. Industrial doors found a rapid rise.



原因和解决设施：超出弹簧的承载量；遵守弹簧的承载圈数规定，重新调试弹簧圈数；



Reasons and solutions: exceeding the load capacity of the spring; comply with the provisions of the number of bearing rings of the spring, re-adjust the number of spring rings;



7、经常发现外来事物对门的损坏，



7. Damage to doors caused by foreign things is often found.



原因和解决设施：没有明显的安全标示，导致人或者动物容易容易撞门；张贴警示图片或者应用闪爆灯作为提醒；



Reasons and solutions: There is no obvious safety label, which makes people or animals easy to bump into the door; posted warning pictures or use flash as a reminder;



8、齿轮容易夹住衣服或者其余东西



8. Gears are easy to grip clothes or other things



原因和解决设施：应用隔离装置；安装隔离栏或者放置隔离的装置，不要在滑升门运行的时候有人接近；



Reasons and solutions: Apply isolation devices; install isolation barriers or install isolation devices, do not be approached when sliding doors are running;



9、工业门运行不稳定，



9. The operation of industrial doors is unstable.



原因和解决设施：弹簧未承载；定期检查弹簧的平衡度和承载力。



Reasons and solutions: the spring is not loaded; check the balance and bearing capacity of the spring regularly.