「推拉门配件」厂房推拉门采用专门轧制的高强度铝合金

「推拉门配件」厂房推拉门采用专门轧制的高强度铝合金



"Push-pull Door Accessories" Powerhouse Push-pull Doors adopt specially rolled high strength aluminium alloy


 

厂房推拉门，因其外观时尚大气，密封性好，抗风性强，是比较流行的厂房大门，市面上大部分都采用上承重下导向方式



Powerhouse sliding doors are popular because of their fashionable appearance, good sealing and strong wind resistance. Most of them adopt up-load and down-load guiding mode on the market.



其门板材质有彩钢发泡（内发泡聚氨酯）板，和EPS板（俗称泡沫夹芯板）其上承重采用扣件支撑固定，轨道放入扣件中



The door panels are made of color steel foaming (inner foaming polyurethane) board and EPS board (commonly known as foam sandwich panels). The bearing is supported by fasteners, and the track is fasten into fasteners.



吊轮与门板固定在轨道中行走，若采用双开时候，应当在轨道里面装限位装置，用以固定门板行程，电机方面也应该调好行程和遇阻反弹或者遇阻停止力度！



The crane wheel and door plate are fixed in the track. If double-open is used, the limit device should be installed in the track to fix the door plate travel. The motor should also adjust the travel and rebound or stop in case of obstruction.

车间厂房推拉门的拼接:



The splicing of sliding doors in workshop workshop:



小门框、门板拼接处等均采用专门轧制的高强度铝合金或不锈钢型材，大大减轻了门体自重，且无需防锈和油漆处理，美观典雅。



Small doorframe and door plate joints are made of specially rolled high strength aluminum alloy or stainless steel profiles, which greatly reduces the weight of the door body, and does not need rust prevention and paint treatment, and is beautiful and elegant.



1、上承重下导向工业推拉门:我公司生产的门板和配件均采用拼装方式设计，无需电焊固定，我公司专业设计的门板包边直交标用于固定90度之间的包边



1. Load-bearing down-oriented industrial push-pull doors: The door panels and fittings produced by our company are designed by assembling method without welding and fixing. The door panels designed by our company are used for fixing the wrapping edges between 90 degrees.



采用上承重下导向装置，电机限位装置，下导向中间固定方式安装，能有效防止正面、侧面风力干扰!这种设计适用30个平方之内



It can effectively prevent the front and side wind disturbance by installing upper load-bearing and lower guide device, motor limit device and middle fixed way of lower guide. This design is suitable for 30 square meters.



2、上导向下承重工业推拉门:为了满足大型厂房用门，我公司采用上导向下承重方式设计;上导向部分采用H型钢和导向轮配合使用



2. Up-steering and down-bearing industrial sliding doors: In order to meet the needs of large-scale factory doors, our company adopts up-steering and down-bearing design; the up-steering part uses H-shaped steel and guide wheel.

下承重采用承重轮和青轨承重，上导向和下承重设置限位卡，保证门体有效运行，另外根据现场要求还可以做成多门扇分节平移方式



Lower load-bearing wheel and green rail load-bearing, upper guide and lower load-bearing set limit card to ensure the effective operation of the door body, in addition, according to the requirements of the site can also be made into multi-sector translation mode.

一电三机一安八装五在七门一板四下三便零方零，于维修，门板内部设计抗风横条。



One electricity, three machines, one installation, eight installation, five in seven doors, one board, four under three conveniences, zero square, in maintenance, the interior of the door board is designed with wind-resistant strips.



「推拉门配件」厂房推拉门采用专门轧制的高强度铝合金



"Push-pull Door Accessories" Powerhouse Push-pull Doors adopt specially rolled high strength aluminium alloy



我公司是专业生产制作工业保温推拉门、保温平开门、保温折叠门、欧式卷帘门、车库门的厂家。另批发销售镀锌吊轨、镀锌密封门边、吊轮、吊件、上插销 、地插销、合页、包角、门档、扣手等全套工业门配件。



Our company is a professional manufacturer of industrial thermal insulation sliding doors, thermal insulation flat open doors, thermal insulation folding doors, European curtain doors, garage doors. In addition, wholesale sales of galvanized lifting rails, galvanized sealed door edges, cranes, lifting parts, top bolts, floor bolts, hinge, angle, door gear, button and other complete sets of industrial door accessories.