Selection of Industrial Translational Door Track for "Translational Door Accessories"
Installation track of industrial translation door and then equipped with a motor can realize remote control and automatic door opening, which is convenient and fast.
The commonly used aluminium alloy doors are divided into double-open doors and translation doors. They are usually used for the entrance of private villas'self-built houses. They also include wall doors or slot doors. Here, the installation of the track of translation doors is emphasized.
1. Material selection for track of translation door; I-beam steel with hot-dip galvanized steel as raw material is generally adopted, with high strength and no rust (high-voltage tower is hot-dip galvanized, non-market galvanized pipe)
2. Installation dimension requirement of aluminium alloy translation door. Firstly, the track height of translation door should be higher than 10 mm of marble surface. Marble can be sealed next to the track, so there will be no gap.
Another is to install on the marble floor flat, with 5 mm gaps left on both sides of the track for stainless steel pulleys to slide.
平移门轨道距离门柱水泥墩（已贴好大理石面计算）100mm，（即：大门一般的边框30mm 导槽宽度50mm 缝隙20mm），平移门轨道长度一般是整个大门的一倍，如果大门宽度是4.3米，那么导轨长度就是8.6米。
The track length of the translation door is 100 mm from the cement pier of the portal column (calculated by the marble surface), (i.e. the width of the 30 mm guide slot of the general gate frame is 50 mm and the gap is 20 mm). The track length of the translation door is usually twice that of the whole gate. If the width of the gate is 4.3 meters, the length of the guide rail is 8.6 meters.
The trajectory of the translation door is 1 cm above the ground. It can be sealed and tiled around. The gap is too big, ugly and not easy to clean.
For installation of pre-embedded parts of pulley position at upper end of aluminium alloy translation door, please call Mr. Li if you need to watch video of installation site of guide rail of translation door.
The company wholesale translation door accessories, motors, racks and other products, used in a variety of styles and models of translation doors, industrial sliding doors, a large number of spot, low-cost wholesale, welcome to purchase.
「平移门配件」工业平移门轨道的选择作者：工业推拉门轨道 时间：2019/7/22 9:53:41
- 工业推拉门配件-购买平移门配件自己做大门 23-03-27
- 工业门配件厂家批发-电动提升门配件 22-11-29
- 工业折叠门-厂房电动折叠门定做 22-09-22
- 工业推拉门配件-平移门吊轮吊轨批发 22-09-01