「快速门配件」堆积门轴更换及维修方法

「快速门配件」堆积门轴更换及维修方法


Replacement and Maintenance of Accumulated Door Shaft for Fast Door Accessories

 

我国工业经济的快速发展，当前大型快速卷帘门的需求越来越大，被遍及用于各种工业厂房、物流通道、车间、仓库、机房、车库等场所。随着 工业门系列产品的提高，使用单位对门体的表面、抗风强度、驱动及控制系统、制作工艺和使用寿命等合理性请求也越来越高。


With the rapid development of China's industrial economy, the demand for large-scale fast curtain doors is increasing. They are widely used in various industrial plants, logistics channels, workshops, warehouses, machine rooms, garages and other places. With the improvement of industrial door series products, users have higher and higher requirements for the rationality of door surface, wind resistance, drive and control system, fabrication process and service life.


据了解，工业门就是为了满足这一市场的请求而计划新一代产品。


It is understood that the industrial gate is to meet the requirements of this market and plan a new generation of products.

 

1.快速卷帘门大轴安装前，先将挂板定好方向装到卷轴上，再把4-6片帘板装到挂板上并卷紧在卷轴上川铁丝扎牢。


1. Before installing the main axle of the fast rolling shutter door, fix the hanging plate on the reel in a fixed direction, then install 4-6 sheets of curtain plate on the hanging plate and tighten the Sichuan wire on the reel.
 

2.吊装快速卷帘门大轴，一定要注意安全，设专人指挥、人字梯、脚手架、手拉葫芦都要经由检查。快速卷帘门安装时先将套上轴承及座的光轴塞入卷轴端孔中，对准位置后将轴承固定螺栓拧紧。


2. When hoisting the large axle of the fast rolling shutter door, we must pay attention to safety. The installation of special commanders, ladders, scaffolding and hand-pulled hoists should be inspected. In the installation of fast shutter door, the optical axle with bearing and seat is inserted into the end hole of the scroll, and the fixed bolt of the bearing is tightened after alignment.
 

3.卷轴上好后，可左右移动卷筒调节位置。同时用水平尺和水平管复核一下卷轴的水平。调整好后，光轴与卷轴满焊固定，光轴与轴承用支头螺钉固定。


3. After the reel is good, the reel can be moved left and right to adjust its position. At the same time, check the level of the reel with the level ruler and horizontal pipe. After adjustment, the optical shaft and the reel are fully welded and fixed, and the optical shaft and the bearing are fixed with the support screw.


4.卷轴吊装时要特别注意不要碰坏卷在轴上的帘板，用钢丝绳捆扎时要垫木板。


4. When hoisting the reel, special attention should be paid to not breaking the curtain board rolled on the axle, and to pad the board when tied with wire rope.
 

手艺参数：


Technical parameters:


表面：高强度抗氧化铝合金门框120×130㎜，银白色，符合6063-T6标准，冷扎板静电喷涂门罩、机箱。



Surface: High strength anti-oxidation aluminium alloy door frame 120 x 130 feet, silver white, in line with the 6063-T6 standard, cold binding plate electrostatic spraying door cover, chassis.

 

动力机能：德国SEW刹车制动马达，功率0.75-1.5KW,电源220V/380V，制动电压220V。


Power function: German SEW brake motor, power 0.75-1.5KW, power 220V/380V, brake voltage 220V.


控制系统：进口微电脑变频控制电箱（三菱cpu）。


Control System: Imported Microcomputer Frequency Conversion Control Unit (Mitsubishi CPU).
 

控制电压：安全低压 24VDC。


Control Voltage: Safe Low Voltage 24VDC.


开启速度：开启0.8-2.0m/秒/关闭 0.6-1.2m/秒(变频可调速)。


Opening speed: Open 0.8-2.0m/s/close 0.6-1.2m/s (variable frequency adjustable speed).
 

门帘质料：进口高密度聚脂纤维外观镀膜处理，厚度0.8mm-1.5mm，颜色种种选择。


Door curtain material: Imported high density polyester fiber appearance coating treatment, thickness 0.8mm-1.5mm, color options.

 

拉伸强度：5700/5100N/5cm,撕裂强度900/80N。


Tensile strength: 5700/5100N/5cm, tear strength 900/80N.


防火级别：德国标准MZD/NBL难燃。


Fire protection level: German standard MZD/NBL is non-flammable.
 

应用温度：-10℃+70℃。


Application temperature: - 10 C + 70 C.
 

通明视窗：进口PVC通明水晶软板，厚度1.5mm，长方形或椭圆形

Tongming Window: Imported PVC Tongming Crystal Flexible Board, 1.5mm Thickness, Rectangular or Elliptical